In a typical kitchen remodel, cabinets take the biggest bite of the budget, usually around a quarter to a third, followed by installation labor, appliances and countertops. Flooring, lighting, plumbing fixtures and backsplash tile share what is left, and a smart plan sets aside an extra 10–15% for surprises. Understanding this split is the fastest way to control your kitchen remodel cost, because it shows which decisions actually move the total.

Key takeaways

  • Cabinets and hardware typically account for roughly 25–35% of a kitchen remodel budget.
  • Labor often runs 15–30%, and it rises quickly when walls, plumbing or gas lines move.
  • Appliances and countertops together can equal or exceed the cabinet budget at the high end.
  • Keeping the existing layout is the single most effective way to lower the total.
  • Always reserve a 10–15% contingency, especially in older homes.

The kitchen remodel cost breakdown at a glance

The percentages below are a rough rule of thumb for a mid-range remodel that replaces cabinets and counters in roughly the same layout. They are typical ranges, not fixed formulas, and every kitchen shifts the mix.

CategoryTypical share of budgetWhat drives it
Cabinets and hardware25–35%Stock vs semi-custom vs custom, number of boxes, interior organizers
Installation labor15–30%Demolition, carpentry, layout changes, tile setting, finish work
Appliances10–20%Brand tier, panel-ready units, range hood, number of appliances
Countertops8–15%Material, square footage, edge profile, sink and cooktop cutouts
Flooring5–8%Material and whether flooring runs into adjacent rooms
Lighting and electrical4–6%Recessed lights, under-cabinet lighting, new circuits
Plumbing fixtures3–5%Sink, faucet, disposal, pot filler
Backsplash2–5%Tile type, pattern and square footage
Design, permits, paint, misc.around 5%Drawings, permit requirements, drywall repair, paint
Contingency (on top)10–15%Hidden damage, code updates, mid-project changes

Line by line: what each category really pays for

Cabinets: the anchor of the budget

Cabinets cost the most because there are so many of them, and quality varies widely. Stock cabinets come in fixed sizes and finishes. Semi-custom lines offer more sizes, finishes and organizers. Custom cabinetry is built to your exact space. Interior upgrades like pull-out trash, drawer dividers and lift-up appliance garages add up box by box. If your current cabinets are solid and the layout works, painting or refacing them can move this line from the largest to one of the smallest.

Labor: where layout decisions show up

Labor covers demolition, hauling, carpentry, cabinet installation, tile setting and all the finish work that makes a kitchen look tight and level. It also includes licensed trades for plumbing and electrical. The moment you move a sink, add an island with a prep sink or relocate a range, labor climbs. In homes on a concrete slab, moving a drain line can mean cutting the slab, which adds both time and cost.

Appliances: a budget you control completely

Appliances are the most flexible category. A standard four-piece package and a professional-style range with panel-ready refrigeration can differ by tens of thousands of dollars. Decide on appliances before cabinets are finalized, because their sizes determine cabinet openings.

Countertops: material plus fabrication

The price you see per square foot is only part of the story. Edge profiles, sink cutouts, waterfall ends and seams all affect fabrication. Quartz and granite are the most common choices for Atlanta kitchens because they balance durability and price.

The supporting cast

Flooring, lighting, plumbing fixtures and backsplash tile each look small on their own, but together they often equal the countertop budget. A good lighting plan with recessed and under-cabinet lights changes how a kitchen feels more than almost any other upgrade per dollar spent. Flooring choices are covered in detail in our guide to luxury vinyl plank installation.

An illustrative $50,000 budget

To make the percentages concrete, here is how a hypothetical $50,000 mid-range kitchen budget might be allocated using the middle of each range. This is an example for planning only, not a quote.

CategoryExample allocation
Cabinets and hardware$15,000
Installation labor$11,000
Appliances$7,500
Countertops$5,500
Flooring$3,000
Lighting and electrical$2,500
Plumbing fixtures$2,000
Backsplash$1,500
Design, permits, paint, misc.$2,000
Subtotal$50,000
Contingency (12%, held separately)$6,000

Notice that the contingency sits outside the project total. If nothing goes wrong, it stays in your pocket. If the old dishwasher has been leaking into the subfloor for years, it is already budgeted.

Costs that catch homeowners off guard

Where to trim and where to hold firm

Some savings are smart; others come back as repairs.

Usually safe to trimUsually worth protecting
Appliance brand tierCabinet box construction and drawer hardware
Decorative backsplash on every wall (choose one feature wall)Proper installation and leveling
Custom sizes when stock or semi-custom fitsElectrical capacity and lighting plan
Exotic stone when quartz delivers the lookWater protection at sink and dishwasher

The National Kitchen and Bath Association offers helpful kitchen planning resources if you want to dig into layout and clearance guidelines before meeting with a remodeler.

Turning a breakdown into a real number

Percentages help you plan, but your actual kitchen remodel cost depends on your room size, layout and selections. For approximate 2026 price tiers in the Atlanta area and a phase-by-phase timeline, read our complete Atlanta kitchen remodeling guide. When you are ready, Green Z Remodeling will walk your space and give you an itemized written quote. Learn more about our kitchen remodeling services in Atlanta, including cabinetry, countertop installation and tile backsplashes, or see finished kitchens in our gallery of recent projects.

Frequently asked questions

What is the most expensive part of a kitchen remodel?

Cabinets are usually the most expensive part, typically about 25 to 35 percent of the budget, because a kitchen needs many boxes and quality varies widely. At the high end, premium appliances and countertops can rival the cabinet budget. Layout changes also raise costs quickly by adding plumbing, electrical and carpentry labor.

How much should I budget for contingency in a kitchen remodel?

Plan for about 10 to 15 percent of your project total as a separate contingency fund. It covers hidden water damage, electrical upgrades, subfloor leveling and other surprises that only appear once demolition starts. Older homes and projects with layout changes should lean toward the higher end of that range.

How can I lower my kitchen remodel cost without sacrificing quality?

Keep the existing layout so plumbing and gas lines stay put, choose stock or semi-custom cabinets with good construction, pick quartz instead of exotic stone, and limit decorative tile to one feature wall. Avoid trimming installation quality, electrical capacity or water protection, since those shortcuts usually lead to costly repairs later.

What percentage of a kitchen remodel is labor?

Labor typically represents about 15 to 30 percent of a kitchen remodel budget. The share rises when the project includes layout changes, an island with plumbing, custom tile patterns or extensive subfloor work. Simpler projects that replace cabinets and counters in the same layout tend to sit at the lower end of that range.

Get an Itemized Quote for Your Kitchen

See exactly where your budget goes with a free, line-by-line quote. Financing is available, and every kitchen includes a 1-year labor warranty.

Call (678) 855-8482 or request your free quote online. See what Atlanta homeowners say in our Google reviews.