A fireplace remodel can change the whole feel of a living room without touching the rest of the house. The most effective updates are a new surface on the surround, such as stone veneer, limewash or tile, a new mantel, and built-ins that frame the fireplace as a focal wall. Below are ten ideas with the materials behind them, what each one does well, and the typical cost range to expect.

Key takeaways

  • Limewash or paint is the lowest-cost fireplace update; stone veneer and built-ins are the most dramatic.
  • Tile surrounds give the most design range, from sleek slab-look porcelain to handmade zellige.
  • A new mantel alone can modernize a dated brick fireplace.
  • Any material near the firebox must be non-combustible and meet clearance requirements.
  • Have the chimney and firebox inspected before investing in new finishes.

Before you pick a look: three quick checks

Every fireplace remodel starts with the same questions. Is it wood-burning, gas or purely decorative? Is the firebox in good shape? And how will you use the room, for TV watching, entertaining or quiet reading? The answers decide which materials are safe and which layouts make sense. If the fireplace is used for real fires, have the chimney and firebox inspected by a certified chimney professional; the Chimney Safety Institute of America explains what an inspection covers.

1. Floor-to-ceiling stone veneer

Manufactured or natural thin stone veneer turns a plain wall into the room’s anchor. Stacked ledgestone reads modern, while rounded fieldstone feels rustic. Running the stone all the way to the ceiling draws the eye up and makes a living room with tall ceilings feel intentional rather than empty.

Best for: large rooms and two-story family rooms. Watch out for: weight and wall preparation; veneer needs a proper substrate behind it.

2. Limewashed brick

Limewash soaks into brick instead of sitting on top like paint, giving a soft, chalky, slightly aged finish. It lets some of the brick’s character show through and can be adjusted from light and patchy to nearly opaque.

Best for: red or orange brick from the 1970s and 80s that feels heavy. Watch out for: limewash works on raw, unsealed masonry, not over existing paint.

3. Painted brick in a bold color

Paint gives full coverage and a clean, modern look. Soft white is the classic choice, but deep charcoal, navy or green can make a fireplace the star of the room. Use a heat-rated product near the firebox opening.

Best for: quick, budget-friendly updates. Watch out for: paint is hard to remove later if you change your mind.

4. Large-format porcelain tile

Oversized porcelain panels with a marble or concrete look create a seamless, contemporary surround with very few grout lines. It is easy to clean and pairs well with linear gas fireplaces.

Best for: modern and minimalist interiors. Watch out for: big tiles demand a flat wall and an experienced installer.

5. Handmade or zellige tile surround

Glossy, irregular handmade tile catches light and adds texture without overwhelming the room. Stacked vertically or set in a herringbone pattern, it brings an artisan feel to a simple surround.

Best for: transitional and coastal styles. Watch out for: handmade tile varies piece to piece, which is part of its charm, so expect variation.

6. Built-ins on both sides

Cabinets below and open shelves above, flanking the fireplace, add storage and make the whole wall feel designed. Built-ins also help balance a fireplace that sits off-center.

Best for: family rooms that need storage for media, books and games. Watch out for: keep shelving at a safe distance from the firebox opening.

7. A new mantel

Swapping a thin or ornate mantel for a chunky wood beam, a clean painted shelf or a stone mantel can modernize the fireplace on its own. It is one of the simplest ways to change the room’s style.

Best for: fireplaces where the surround is in good shape. Watch out for: combustible mantels must sit at the required distance above the opening.

8. Smooth plaster-look overmantel

A smooth, troweled finish above the mantel, sometimes with a slight curve or taper, gives a European, sculptural look. It works beautifully with natural wood and neutral palettes.

Best for: modern organic and minimalist homes. Watch out for: this finish needs skilled application to look even.

9. A refreshed hearth

Many older fireplaces have a raised brick hearth that takes up floor space and dates the room. Replacing it with a flush hearth in stone or tile, or capping the existing hearth with a single slab, cleans up the lines. Coordinating the hearth with new flooring, such as the planks covered in our luxury vinyl plank installation guide, ties the room together.

Best for: rooms where floor space is tight. Watch out for: the hearth must still meet non-combustible extension requirements in front of the firebox.

10. A media wall that works with the fireplace

Many households want the TV and the fireplace on the same wall. A recessed niche above the mantel, hidden wiring and built-in storage for equipment create a clean media wall. Keep heat in mind: the TV should be placed where it will not be exposed to excessive heat from the fireplace.

Best for: living rooms where the fireplace is the only logical TV wall. Watch out for: plan wiring before the new surround goes up.

Comparing the ideas: cost and impact

The ranges below are typical, approximate figures for the Atlanta area in 2026. Your exact price depends on wall size, existing materials and prep, and comes from a free in-home quote.

IdeaVisual impactApproximate 2026 range
Limewash or paintModerate$500–$2,500
New mantel onlyModerate$800–$3,500
Tile surround (porcelain or handmade)High$2,000–$7,500
Refreshed hearthModerate$1,500–$5,000
Stone veneer, floor to ceilingVery high$4,000–$12,000
Built-ins on both sidesVery high$5,000–$15,000+
Full media wall with surroundVery high$7,000–$20,000+

Combining ideas for a complete makeover

The most striking fireplace walls usually combine two or three ideas: a tile or stone surround, a new mantel and built-ins. If you are also updating other rooms, the same tile skills that go into a fireplace surround go into showers and backsplashes; our bathroom remodel cost guide shows how tile choices affect budgets there, too.

Green Z Remodeling handles fireplace remodeling across the Atlanta metro, from Buckhead and Brookhaven to Roswell and Milton. See our fireplace remodeling and other services, or browse our project gallery for tile and stone work.

Frequently asked questions

How much does a fireplace remodel cost?

Approximate 2026 costs in the Atlanta area range from about $500 to $2,500 for limewash or paint, $2,000 to $7,500 for a new tile surround, and $4,000 to $12,000 or more for floor-to-ceiling stone veneer. Built-ins and full media walls can cost more. A free in-home quote gives you exact pricing for your fireplace.

Can you put tile over an existing brick fireplace?

Often, yes. Brick can be cleaned, leveled and prepared so tile or stone veneer bonds properly, or covered with a suitable backer board first. The right method depends on the brick’s condition and flatness. Materials near the firebox must be non-combustible and rated for heat, so an experienced installer should assess the surface.

Is limewash better than paint for a brick fireplace?

Limewash soaks into raw brick and creates a soft, breathable, slightly weathered finish that lets the brick’s texture show. Paint covers completely and offers more color choices but is harder to undo. Limewash only works on unsealed, unpainted masonry, while paint can go over most brick surfaces with proper preparation.

Do I need to inspect my chimney before remodeling a fireplace?

If you burn real fires, yes. A certified chimney professional should inspect the chimney, flue and firebox before you invest in new finishes. Cracks, liner damage or draft problems are much easier and cheaper to fix before a new surround, stone veneer or built-ins are installed around the fireplace.

Make Your Fireplace the Focal Point Again

Tell us which ideas you love and we’ll give you a free quote for your fireplace remodel, with financing available and a 1-year labor warranty.

Call (678) 855-8482 or request your free quote online. See what Atlanta homeowners say in our Google reviews.